

Home | SLS | Materials | Request a Quotation | Case Studies | Contact




DuraForm GF is a glass (bead) filled nylon based on nylon 12 developed for applications in more extreme testing environments delivering improved stiffness and heat resistance relative to DuraForm PA. It can be readily machined and painted.
General Properties | Value | Test |
Specific Density | 1.49 g/cm3 | ASTM D792 |
Moisture Absorption – 24 hours | 0.22% | ASTM D570 |
Mechanical Properties | Value | Test |
Tensile Strength, Yield | 27 MPa (3916 psi) | ASTM D638 |
Tensile Strength, Ultimate | 26 MPa (3771 psi) | ASTM D638 |
Tensile Modulus | 4068 MPa (590 ksi) | ASTM D638 |
Elongation at Yield | 1.4% | ASTM D638 |
Elongation at Break | 1.4% | ASTM D638 |
Flexural Strength, Yield | N/A | ASTM D790 |
Flexural Strength, Ultimate | 37 MPa (5366 psi) | ASTM D790 |
Flexural Modulus | 3106 MPa (450 ksi) | ASTM D790 |
Hardness, Shore D | 77 | ASTM D2240 |
Impact Strength (notched IZOD, 23°C) | 41 J/m (0.8 ft-lb/in) | ASTM D256 |
Impact Strength (unnotched IZOD, 23°C) | 123 J/m (2.3 ft-lb/in) | ASTM D256 |
Garner Impact | 4.5 J (3.3 ft-lb) | ASTM D5420 |
Thermal Properties | Value | Test |
Heat Deflection Temperature (HDT) | 179°C (354°F) @ 0.45 MPa | ASTM648 |
Coefficient of Thermal Expansion (51-150°C) | 82.6 µm/m-°C (45.9 µin/in-°F) @ 0-50°C | ASTM E831 |
Specific Heat Capacity | 1.09 J/g-°C (0.261 BTU/lb-°F) | ASTM E1269 |
Thermal Conductivity | 0.47 W/m-K (3.26 BTU-in/hr-ft2-°F | ASTM E1225 |
Flammability | HB | UL 94 |
Electrical Properties | Value | Test |
Volume Resistivity | 3.2 x1011 ohm-cm | ASTM D257 |
Surface Resistivity | 3.2 x1011 ohm | ASTM D257 |
Dissipation Factor, 1 KHz | 0.177 | ASTM D150 |
Dielectric Constant, 1 KHz | 6.27 | ASTM D150 |
Dielectric Strength | 8.7 kV/mm (221 kV/in) | ASTM D149 |
Data was generated by building parts under typical default parameters. |
|
|
Copyright © 2022 Keyworth Rapid Manufacturing Limited | Privacy+Cookies |Terms & Conditions