Duraform EX model
Duraform EX model
Duraform EX model

DuraForm EX

DuraForm EX is based on nylon 11 and is available in natural or black. The key benefits are enhanced toughness and suitability for low to medium volume manufacturing runs. Various types of clip and living hinges can be produced.

Technical Data

Click here for supplier's data sheet.

General Properties

Value

Test

Specific Density

1.01 g/cm3

ASTM D792

Moisture Absorption – 24 hours

0.48%

ASTM D570

Moisture Saturation

1.15%

ASTM D570

Mechanical Properties

Value

Test

Tensile Strength, Yield

37 MPa (5366 psi)

ASTM D638

Tensile Strength, Ultimate

48 MPa (6961 psi)

ASTM D638

Tensile Modulus

1517MPa (220 ksi)

ASTM D638

Elongation at Yield

5%

ASTM D638

Elongation at Break

47%

ASTM D638

Flexural Strength, Yield

42 MPa (6091 psi)

ASTM D790

Flexural Strength, Ultimate

46 MPa (6672 psi)

ASTM D790

Flexural Modulus

1310 MPa (190 ksi)

ASTM D790

Hardness, Shore D

74

ASTM D2240

Hardness, Rockwell L

69

ASTM D785

Hardness, Rockwell M

34

ASTM D785

Impact Strength (notched IZOD, 23°C)

74 J/m (1.4 ft-lb/in)

ASTM D256

Impact Strength (unnotched IZOD, 23°C)

1486 J/m (27.8 ft-lb/in)

ASTM D256

Garner Impact

11.8 J (8.7 ft-lb)

ASTM D5420

Thermal Properties

Value

Test

Heat Deflection Temp

188°C @ 0.45 MPa
48°C @ 1.82 MPa

ASTM648

Coefficient of Thermal Expansion (51-150°C)

120.0 µm/m-°C (66.7 µin/in-°F) @ 0-50°C
342 µm/m-°C (190 µin/in-°F) @ 85-145°C

ASTM E831

Specific Heat Capacity

1.75 J/g-°C (0.418 BTU/lb-°F)

ASTM E1269

Thermal Conductivity

0.51 W/m-K (3.5 BTU-in/hr-ft2-°F)

ASTM E1225

Flammability

HB

UL 94

Electrical Properties

Value

Test

Volume Resistivity

1.3 x1013 ohm-cm

ASTM D257

Surface Resistivity

4.9 x1013 ohm

ASTM D257

Dissipation Factor, 1 KHz

0.050

ASTM D150

Dielectric Constant, 1 KHz

4.5

ASTM D150

Dielectric Strength

18.5 kV/mm (470 kV/in)

ASTM D149

Data was generated by building parts under typical default parameters. DuraForm EX was processed on a base level Sinterstation HiQ SLS system at 13 watts laser power, 5 metres/sec scan speed, and a powder layer thickness of 0.1mm.

 

 

Copyright © 2022 Keyworth Rapid Manufacturing Limited | Privacy+Cookies |Terms & Conditions